User Tools

Site Tools


50 Example capture files

The following files were captured with Wireshark on the machine where the LabVIEW code was running. The files not only contain the S7-specific traffic, but all traffic on the captured interface. Therefore, use a display filter (examples listed below) to show only the relevant packets.

Two devices were investigated:

  • S7-1200 (in the HSE office): display filter ip.addr ==
  • S7-1500 (on my desk): display filter ip.addr ==


kb/production/s7-communication/capture-files.txt · Last modified: 2021/05/21 12:30 by manuel.sebald